ADM Fault Codes
Jump to navigation
Jump to search
To use this table with ease, please use the Find or Search function of your web browser.
| Fault Code | Description |
|---|---|
| ADM | ADM adaptation module |
| 0101 | Analog input1: level below applicable threshold. |
| 0102 | Analog input1: level is above applicable threshold. |
| 0401 | Dynamic input (tachograph): cable break |
| 0402 | Dynamic input (tachograph): frequency fault |
| 0501 | Dynamic input (generator): assignment error |
| 0502 | Dynamic input (generator): variation |
| 0601 | Dynamic input (accelerator pedal): pedal unit is faulty. |
| 0602 | Dynamic input (accelerator pedal): idle throttle stop is restricted. |
| 0603 | Dynamic input (accelerator pedal): pedal unit is not within learned range. |
| 0604 | Dynamic input (accelerator pedal): pedal unit is not learned. |
| 0605 | Dynamic input (accelerator pedal): accelerator pedal signal GAS1 is not present. |
| 0606 | Dynamic input (accelerator pedal): accelerator pedal signal GAS2 is not present. |
| 0701 | Dynamic input (manual throttle actuator): signal is not within defined range. |
| 0702 | Dynamic input (manual throttle actuator): signal is not present. |
| 0801 | Driver output (engine brake 1): output is implausible. |
| 0901 | Driver output (retarder): output is implausible. |
| 1001 | Power supply (terminal 30): overvoltage |
| 1002 | Power supply (terminal 30): undervoltage |
| 1101 | CAN interface (engine CAN): no link to MR |
| 1102 | CAN interface (engine CAN): no 'single-wire capability' function |
| 1103 | CAN interface (engine CAN): MR data are implausible. |
| 1104 | CAN interface (engine CAN): cable is faulty.(CAN single-wire operation) |
| 1201 | Driver output (engine brake 2): output is implausible. |
| 1301 | EEPROM: error can be corrected. |
| 1302 | EEPROM: error cannot be corrected. |
| 1401 | CAN interface: no link to FR(FMR) |