ADM Fault Codes

To use this table with ease, please use the Find or Search function of your web browser.

Fault Code	Description
ADM	ADM adaptation module
0101	Analog input1: level below applicable threshold.
0102	Analog input1: level is above applicable threshold.
0401	Dynamic input (tachograph): cable break
0402	Dynamic input (tachograph): frequency fault
0501	Dynamic input (generator): assignment error
0502	Dynamic input (generator): variation
0601	Dynamic input (accelerator pedal): pedal unit is faulty.
0602	Dynamic input (accelerator pedal): idle throttle stop is restricted.
0603	Dynamic input (accelerator pedal): pedal unit is not within learned range.
0604	Dynamic input (accelerator pedal): pedal unit is not learned.
0605	Dynamic input (accelerator pedal): accelerator pedal signal GAS1 is not present.
0606	Dynamic input (accelerator pedal): accelerator pedal signal GAS2 is not present.
0701	Dynamic input (manual throttle actuator): signal is not within defined range.
0702	Dynamic input (manual throttle actuator): signal is not present.
0801	Driver output (engine brake 1): output is implausible.
0901	Driver output (retarder): output is implausible.
1001	Power supply (terminal 30): overvoltage
1002	Power supply (terminal 30): undervoltage
1101	CAN interface (engine CAN): no link to MR
1102	CAN interface (engine CAN): no 'single-wire capability' function
1103	CAN interface (engine CAN): MR data are implausible.
1104	CAN interface (engine CAN): cable is faulty.(CAN single-wire operation)
1201	Driver output (engine brake 2): output is implausible.
1301	EEPROM: error can be corrected.
1302	EEPROM: error cannot be corrected.
1401	CAN interface: no link to FR(FMR)